当前位置>首页>助剂产品>应用领域分类>水性工业漆用助剂
科莱恩助剂|D-foam-R C 740硅类消泡剂|抑泡性好长效性好兼容性高
特点：
中档硅类消泡剂，抑泡性能好，长效性好，兼容性高。
商务热线：0757-26625082
产品详情
本公司专业经营助剂产品，以高端助剂品牌：科莱恩、海名斯·德谦、道康宁、长昊助剂为主体。产品广泛应用于涂料、油墨、纺织、洗涤、造纸、陶瓷、胶黏剂、石油化工等行业。其中分散剂系列在市场上得到了极优的好评。欢迎各位新老顾客咨询洽谈！
联系电话：0757-26625082
旺旺：长昊助剂公司地址：佛山市顺德区容桂朝阳居委会容奇大道183号上城名邸201号商铺
样品说明：本公司可免费提供所有产品样品，如有需要，请联系客服索取！特点：中档硅类消泡剂，抑泡性能好，长效性好，兼容性高。
佛山市顺德区长昊贸易有限公司是科莱恩涂料助剂华南六省（广东、广西、湖南、江西、福建、海南）唯一指定代理商！主要经营科莱恩旗下表面活性剂（润湿剂）、分散剂、消泡剂、乳化剂、保湿剂、杀菌剂（防腐、防霉剂）。
D-Foam-R C 740
Foam Control Agent for water based Coatings, Inks
and Pigment Dispersions
Composition
Silicone based foam control agent
Product properties *)
Appearance at 25 °C
Opaque, white emulsion
Density at 25 °C
About 1,01 g/cm³ (8,44 Lbs/gal)
Viscosity (Brookfield)
About 1300 mPas
Flash point
> 100 °C
Handling and storage
Do not store in close proximity to strong oxidizers.
Unopened containers should be protected from direct
rain, snow or sunlight. Seal partially used containers to
protect from contamination or absorption of moisture
(which can be detrimental to product quality and per-
formance).
Use
D-Foam-R C 740 is a silicone containing antifoam that
provides easy incorporation and excellent compatibility
in water based inks and coatings. D-Foam-R C 740
gives quick knock down and excellent stamina, particu-
lar in high speed, high shear applications. It is very
effective for control of microfoam.
D-Foam-R C 740 may be used in incidental food con-tact applications
in compliance with 21 CFR 175.105 or 176.210.
Typical Applications:
•Water based inks
•Waterborne coatings
•Pigment dispersions
Application Methods:
D-Foam-R C 740 is appropriate for use in pigment
grinding or coating let-down. Typical use concentra-
tions are between 0,1 and 0,4% (on total coating
weight). When added in the let-down step, best per-
formance and compatibility results are generally ob-
served after aging the finished ink or coating for at least
8 hours. As with any defoamer, formulators should
evaluate a range of concentrations to determine the
optimum dose.
This information is based on our present state of knowledge and is intended to provide general notes on our products and their uses. It should not therefore be construed as guaranteeing specific properties of the products described on their suitability for a particular application. Any existing industrial property rights must be observed. The quality of our products is guaranteed under our General Conditions of Sale.
*) These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the product specification sheet. For further information on product properties, toxicological, ecological and safety data, please refer to the safety data sheet.
= registered trademark by Clariant
Page 1/1
