特点：消泡长效性好，有良好的可分散性。对乳胶及乳液具有优异的消泡效果。

D-FOAM-R C115

D-FOAM-R C115 is a 100% active, organic defoamer formulated for use in water based coatings. It is an economical, general purpose product that provides economical foam control and excellent compatibility in most water borne coatings.
D-FOAM-R C115 is most suitable for use in coating let down and has minimal effect on coating gloss.
D-Foam-R C115 may be used in incidental food contact applications in compliance with 21 CFR 175.105 and 176.210.

Typical Applications:
 
•Paper Coatings
•Water Borne Coatings
•Water Based Adhesives
 
Application Methods:
D-FOAM-R C115 is typically formulated into the coating at levels in the range of 0.1 to 0.4% of total coating weight. The formulator should evaluate varied levels to determine the optimal dose.

Product Characteristics (Typical):
 
Appearance                  -    Opaque, light tan colored liquid
Density                         -    7.3 Lbs/gal.
Specific Gravity             -    0.88
Flash Point (PMCC)     -    Greater than 212°F

Handling and Storage:
Keep containers closed and protect from heat, weather or direct sunlight. Do not store in close proximity to strong oxidizers, sparks or flame. Seal partially used containers to protect from contamination or absorption of moisture (which can be detrimental to product quality and performance).

HMIS Codes: Health – 0, Flammability – 1, Reactivity – 0, Personal Protection – B
For more complete health, safety and environmental information, please review our material safety data sheet.

These characteristics are for guidance only and are not to be taken as product specifications. The tolerances are given in the  product specification sheet. For further information on product properties, toxicological, ecological and safety data, pleaserefer to the safety data sheet.